- Swap magic 3.6 iso mega how to#
- Swap magic 3.6 iso mega code#
- Swap magic 3.6 iso mega Pc#
- Swap magic 3.6 iso mega ps2#
The best fix is to clean out the PS-2 of all dust and then relubricate the aforementioned mechanical components with high quality bearing oil and molytone grease. The buzzing noise is caused when the teeth of the rack gear on the pickup jumps over the grooves it was in and then snaps back down on the next set of grooves on the worm gear over and over again. When the PS-2 tries to seek a blue-bottom disc, it tries to move the pickup back and forth on the sled rapidly, but hangs up in the whole process instead because of the bind between the bearings and the sleds due to lack of lubrication, inhibiting free movement. Unlike DVD-ROM, CD-ROM discs require a faster mechanical response from the kicker mechanism to move the pickup back and forth rapidly to assure a fast read. (Although, you never want to use too much lube as that causes problems of its own.) The lube that's on there dries up from the dust exposure and causes the bearings to bind on the sleds, which is why you can have a buzzing PS-2 when reading blue-bottom discs while it may work normally for DVD discs.
Sony didn't use enough lube on the traverse pickup sleds and the kicker mechanism to keep it running right. ELF files, from MC using Swap Discs? I mean, I trust dlanor, he said more than once he's done it with his FMCB incompatible PS2.Posted on Saturday, Novem05:31 GMTThe PlayStation 2 suffers from dust and lubrication problems.
Swap magic 3.6 iso mega how to#
Also in that same thread both he/she and another forum member explain how to actually boot ELF files from USB driver using hotkeys with Swap Magic.Īll that being said (sorry for the wall of text), my question is: How can you boot uLE, and more in general. This is are the posts where he discussed about this topic:īut I've also found another thread where a PSX-Scene contributor, ShaolinAssassin wrote that you can't boot uLE from MC.
Swap magic 3.6 iso mega ps2#
ELFs from a PS2 memory card other than booting them from a USB drive, and he was referring to doing this on a FMCB incompatible model. Now, reading all those threads a notable PS2 modding scene member, dlanor, has stated that he uses Swap Magic to boot uLE and, more generally that you can boot homebrew software. Now, I've read a bunch of threads on various PS2 modding forums and apparently the only way to softmod my PS2 is to boot uLaunchELF (or maybe even the new project wLaunchELF) using a Swap Magic. So at this point I can say I'm quite sure my new PS2 is with bios 2.30. All of those installations worked on my hardmodded PS2 and thus FMCB booted with mc inserted, but none of them made FMCB boot on my new PS2 model.
I tried cross region, cross model and multi installation.
So, I installed FMCB on a mc with my old hardmodded PS2. BIOS won't let your PS2 be compatible with FMCB.
Swap magic 3.6 iso mega code#
Actually, it could be potentially compatible since it's a SCPH-90004 R-Chassis 8C (you can see it in the attached photo), and models with date code were made some with BIOS 2.20 and some with BIOS 2.30. In the past few days I've been trying to get as much info as possible and I found out that my new PS2 model isn't compatible with FMCB.
Swap magic 3.6 iso mega Pc#
I recently bought a second ps2 slim version (I already had and still have a PS2 slim modded in 2004 with a Modbo chip, SCPH-70004) and I want to softmod this new purchase in order to play my backups from PC via the Ethernet cable using OPL.
0 kommentar(er)
